ALL BITS

All our Draft Horse and Warmblood bits are solid stainless steel unless otherwise noted. If you cannot find the bit you are looking for, email: drafttack2@gmail.com or call 1-513-724-0778 Cel 513-491-1577 Monday to Friday 10:00am - 4:00pm est and ask. If we get enough requests for a particular bit, we will have them made.
DH-103NP


STRAIGHT TEAM BIT - NICKEL PLATED
$16.95
Nickle Plated over Malleable Iron
5 1/2" has a 2 3/4" ring, 6" has a 3" ring
Sizes: 5 1/2", 6"
DH-103SS


STRAIGHT TEAM BIT - STAINLESS STEEL
$18.95
Polished stainless steel
6" has a 3" ring
Size 6"
DH-102SS


JOINTED TEAM BIT - STAINLESS STEEL
$19.95
The simple snaffle bit applies pressure to the horse tongue in a pinching manner to aid in controlling the horse. Stainless steel, 3 inch rings.
Sizes: 5 1/2" & 6"
DH-102NP
JOINTED TEAM BIT - NICKEL PLATED
$15.95
The simple snaffle bit applies pressure to the horse tongue in a pinching manner to aid in controlling the horse. Available in Nickle Plated over Malleable Iron with 3 Inch Rings
Sizes: 5 1/2", 6", & 7"
SD-160
LOOSE RING BRADOON
$19.95
I had these made to compliment the dressage Weymouth.
They have a 14mm mouth where it joins the ring, narrower at the center
3" Ring Sizes: 5 1/2" 6",
DH-110
FLAT RING SNAFFLE BIT
$21.95

4" Flat Ring, rounded on the edges .

Sizes: 6", 6 1/2"
SW-7998
Loose Ring Snaffle Bit with Curved Mouth
$26.95

This loose ring snaffle bit has a curved mouth for horse comfort. When sizing this bit, allow extra length for the curve. Most horses require an additional 1/4". SW Bits are made of the world's finest 18-8 (chromium/nickel) stainless steel. This alloy is best for bits because it extremely strong and resists salt and acids in saliva, and will never rust or spot. Surgical quality finish. Our bits are investment (lost wax) cast from carefully crafted models of tested bit designs to insure consistently perfect quality bit after bit. Even with these advanced production methods, every bit is hand inspected. Your horse will appreciate the extra care that goes into designing and making SW Bits.
Sizes: 5 1/2", 6", 6 1/2" 7"
SW-302
LOOSE RING RUBBER SNAFFLE
$24.95

Mouth thickness: 18 mm
Ring size: 3"

Sizes: 5 1/2", 6"
DH-104SS
SINGLE TWISTED WIRE SNAFFLE BIT-STAINLESS STEEL
$23.95




This stainless steel bit is used to lighten the response when a horse becomes heavy on the bit. The twisted wire irritates the corners of the mouth more than a smooth bit.

3" rings
Size: 7 1/4"
DH-104NP
SINGLE TWISTED WIRE SNAFFLE BIT-NICKEL PLATED
$21.95




This nickel plated bit is used to lighten the response when a horse becomes heavy on the bit. The twisted wire irritates the corners of the mouth more than a smooth bit.

Nickel plated over steel

3" rings
Sizes: 6"
DH-105SS
DOUBLE TWISTED WIRE SNAFFLE BIT - STAINLESS STEEL
$25.95
DH-105NP
DOUBLE TWISTED WIRE SNAFFLE BIT- NICKEL PLATED
$23.95
DH-112
LOOSE RING COPPER FRENCH LINK SNAFFLE BIT
$25.95

The stainless steel loose ring with copper french link uses tongue pressure to encourage the horse to go on the bit. Copper is a pleasing taste for the horse. 3" ring
Mouth size with copper link: 5 1/2", 6"
KNS-163
LOOSE RING FRENCH LINK SWEET IRON MOUTH BIT
$29.95
2 3/4" Stainless Steel Loose Rings with Sweet Iron French Link mouth. The Mouth is 18mm at the Loose Ring edge.
Sizes - 6", 6 1/2", 6 3/4"
SW-7397
Jolly Mouth Loose Ring Snaffle
$32.95

Made of the world's finest 18-8 (chromium/nickel) stainless steel. This alloy is best for bits because it extremely strong and resists salt and acids in saliva, and will never rust or spot. Surgical quality finish. Our bits are investment (lost wax) cast from carefully crafted models of tested bit designs to insure consistently perfect quality bit after bit. Even with these advanced production methods, every bit is hand inspected.
Size: 5 1/2", 6"
SD-117
LOOSE RING OVAL LINK SNAFFLE
$29.95

A loose ring snaffle made with a German Silver mouthpiece. German Silver is an alloy made from 65% copper, 12% nickel, and 23% zinc, and is superior to stainless steel. It's high copper content oxidies and encourages softness. It has 3 inch rings, and a thick oval link.
Sizes: 5 1/2"
SW-3997
Loose Ring with oval link and Cuprium Mouth
$36.95
This bits is made of the world's finest 18-8 (chromium/nickel) stainless steel. An alloy that is best for bits because it extremely strong. It also resists salt and acids in saliva, and will never rust or spot. Loose Ring Snaffle with oval link and Cuprium Mouth
Sizes: 5", 5 1/4", 5 1/2", 6"
SW-7977
Loose Ring Curved Snaffle Bit with Cuprium Link
$28.95
The loose ring bit has a curved mouth and cuprium oval link. It is a very gentle hallow mouth bit for sensitive horses. It has 3" rings and is 1/2" (13cm) at the ring edge of the mouth. Because of the curved mouth, allow 1/4" extra length for the mouth size.

Sizes: 5 1/2", 6", 7"
KNS-260
LOOSE RING WATERFORD BIT
$35.95

Loose Ring Waterford Bit
3" Ring
Mouth - 3/4" balls in center of links and 3/8" at mouth edge
Size: 6", 6 1/4", 6 1/2", 7"
SW-3353
EGGBUTT SNAFFLE BIT
$31.95
Side pieces are ovals 3 1/2" high, 3" wide
A mild bit that will not pinch the corners of their mouths. The design ensures that the bit will remain fixed and allows no up and down movement. The Stainless Steel oval shaped rings will not normally pull through the mouth. For a well behaved horse.
Sizes: 5 1/2"5 3/4", 6", 7"
SD-118
EGGBUTT FRENCH LINK SNAFFLE BIT
$29.95
Side pieces are stainless steel oval shaped rings 4" high x 3" wide that will not normally pull through the mouth. For a well behaved draft, this is a milder bit than the snaffle. The link softens the nutcracker effect of the snaffle mouth to their tongue.
Sizes:
5 1/2"
SW-3369
Eggbutt Snaffle Bit with Oval Link
$34.95

Eggbutt Snaffle bit with oval link SW Bits are made of the world's finest 18-8 (chromium/nickel) stainless steel. This alloy is best for bits because it extremely strong and resists salt and acids in saliva, and will never rust or spot. Our bits are investment (lost wax) cast from carefully crafted models of tested bit designs to insure consistently perfect quality bit after bit. Even with these advanced production methods, every bit is hand inspected. Your horse will appreciate the extra care that goes into designing and making SW Bits.
Mouth thickness: 14 mm
Ring size: 2 1/2"
Size 6"
SW-7369
Eggbutt Cuprium-Oval Link Curved Snaffle Bit
$42.95

Oval Link Eggbutt Snaffle Bit
This egg butt snaffle has a curved mouth and is part of the new generation of horse bits. Designed for horse comfort,the egg butt protects the lips from possible pinching. The curved mouth is shaped over the horse's tongue and the cuprium alloy wafer is a flavor that horses love. Our SW Bits are made of the world's finest 18-8 (chromium/nickel) stainless steel. This alloy is best for bits because it extremely strong and resists salt and acids in saliva, and will never rust or spot. Surgical quality finish.
When sizing this bit, allow extra length for the curve. Most horses require an additional 1/4".
The eggbutt is 3 1/4" high and 2 3/4" across. The mouth at the side edge is 1/2"(14mm) thick.
Sizes: 5 1/2", 6"
AHE-162
EGGBUTT SWEET IRON SLOW TWIST
$57.95

MADE IN THE USA!

The stainless steel eggbutt side pieces are 2 1/2" high, 1 1/2". The mouth is made from sweet iron with a twisted mouth that offers more attention getting power that the standard snaffle mouth.
Sizes: 7"

Size
SD-113 D-RING SNAFFLE
$25.95











This D-Ring Snaffle gives slight directional assistance, making use of the face of the horse, similar to that of the full cheek snaffle. The D-ring does not pinch the corner of the mouth.

Stainless Steel Sizes: 5 1/2"
SW-7355
D-Ring Jolly Mouth Snaffle
$36.95

The synthetic mouth of this bit is gentle to horse teeth and tongue. Since it doesn't conduct cold like metal does, it's the ideal bit for winter riding. No need to preheat bit before placing in horse's mouth.

Size: 5 1/2", 6", 6 1/2", 7"
SW-3368
D-Ring Rubber Snaffle
$20.95

SW-C3368 Rubber Mouth Dee Snaffle Bit Mouth thickness: 17 mm*
Ring size: 2 ½" I.D.
*Sizes measured on 5" bits. Other sizes proportional.
Sizes: 5", 5 1/2"
SW-3358
D-Ring Oval Link Snaffle
$35.95


Mouth thickness: 14 mm
Ring size: 2 1/2" I.D.

Size:5 1/2", 6"
SW-7753
Hunter Dee Cuprium Oval Link Snaffle Bit
$42.95
This bit has a curved mouth.
Sizes: 5 1/2", 6", 6 1/2"
DH-101


FULL CHEEK SNAFFLE BIT
$27.95

Eggbutt mouths- will not pinch corners of mouth. 8" Cheek piece, 2 1/2" ring Sizes: 5 1/2"
SW-3230
Copper Mouth Full Cheek Bit
$58.95


Size: 5", 5 1/4", 5 1/2", 5 3/4", 6", 7"
DH-189
FULL CHEEK SLOW TWIST SNAFFLE BIT
$29.95
This stainless steel Full Cheek Slow Twist Snaffle is a bit that applies pressure on the cheek to aid in steering. The Slow Twist mouth helps keep the horses attention. 8" Cheek piece with a centered 2 1/2" ring Sizes: 5 1/2 " & 6"
DH-113
TOM THUMB SNAFFLE BIT
$27.95
8 1/2" side pieces

Stainless Steel Mouth Sizes:
5 1/2, and 6 1/2"
DH-113
TOM THUMB COPPER MOUTH SNAFFLE BIT
$32.95

8 1/2" stainless steel side pieces

Copper Mouth Sizes: 5 1/2",
SW-3961
Short Cheek Jointed Pelham
$52.95
Made of the world's finest 18-8 (chromium/nickel) stainless steel. This alloy is best for bits because it extremely strong and resists salt and acids in saliva, and will never rust or spot.
Size: 5 1/2", 6", 6 1/2", 7"
SW-3962
Short Cheek Jointed Rubber Pelham
$48.95
Cheek pieces are 4" from the top of the ring with the chain to the bottom The middle ring is 1 1/2" wide. The bottom ring is 1 1/4" This bit is made out of stainless steel with a 21mm rubber mouthpiece. Made of the world's finest 18-8 (chromium/nickel) stainless steel. This alloy is best for bits because it extremely strong and resists salt and acids in saliva, and will never rust or spot.
Size: 6, 6 1/2"
KNS-132
PELHAM with JOINTED RUBBER MOUTH BIT
$42.95

Cheek pieces are 6" from the top of the ring with the chain to the bottom The middle ring is 2 inches wide. The bottom ring is 1"
This bit is made out of stainless steel with a rubber mouthpiece

Rubber Mouthpieces have a warmer feel to the horse’s mouth. Horses that do not easily accept stainless steel will sometime accept rubber. The rubber mouthpiece is also useful for a horse with sensitive bars or tongue. The rubber mouthpiece is a milder alternative than stainless steel because the mouthpiece is normally thicker; therefore the pressure is distributed over a larger area. A rubber bit may however be unsuitable if your horse has thicker fleshy lips and/or a large tongue.

Sizes: 6 inches, 6 1/2 inches
KNS-216
WEYMOUTH MULLEN MOUTH BIT
$42.95

Weymouth Mullen Mouth Curb Bit with Chain
Sides are 6"
Bottom ring is 1" inside the ring
Center of the Mullen Mouth is 12mm, 1/2"
Chain is 10" long

Mouth

Sizes: 6"
SW-3999 Hanging Cheek Snaffle with Cuprium Link
$43.95

Hanging Cheek bit with Cuprium link
sizes: 5 1/2, 5 3/4", 6", 6 1/2" and 7"
DH-179
JOINTED BUTTERFLY BIT
$39.95


Jointed Butterfly Bit Size: , 6 1/2" 
AHE-5770
Western Gag bit with Medium Port
$103.99



Hand made in the USA



This western gag bit has a sweet iron medium port Sweet mouthpiece.
4 1/2" stainless steel sides
Size 6" only
KNS-368 CONTINENTAL GAG JOINTED SOLID MOUTH BIT
$37.95

Continental Gag Jointed Solid Mouth Snaffle
Size: 6 1/2"
KNS-318 Full Cheek Waterford Snaffle Bit
$35.95

Full Cheek Waterford Bit
Sizes: 6",
KNS-221 D-RING SNAFFLE
$26.95









All stainless steel bit with 3" high and 2 1/4" across the D-Rings. It is 5/8" at its very widest spot where the mouth joins the D-ring.

Size: 6 1/2"
KNS-087 LOOSE RING JOINTED MOUTH(22mm)
$28.95







Loose Ring bit with a jointed mouth
Mouthpiece is 22mm, and Solid
Sizes: 6", 6 1/2", 7"
KNS-280 HANGING CHEEK JOINTED MOUTH WITH FRENCH LINK
$34.95

Hanging Cheek Snaffle with French link
Sizes: 6", 6 1/2"
KNS-002 JOINTED KIMBERWICK SNAFFLE
$39.95











This all stainless steel bit comes with hooks and chains. The kimberwick sides are 4" tall and 2 3/8" wide. The upper slot is 1" long and the lower slot is 7/8" long. The center of each side of the snaffle mouth is 12mm (1/2") which narrows to 10mm (3/8") before it reaches the kimberwick sides

Sizes: 6", 6 1/2", 7"
KNS-306
CHUBBY FULL CHEEK SNAFFLE BIT
$32.95

Chubby Full Cheek Snaffle Bit
Shanks are 2" from the center, both up and down.
Size: 6"
SW-3993
4-RING CONTINENTAL GAG SNAFFLE
$43.95

The 4-Ring Elevator is also known as a Continental Gag bit. Mouth thickness: 18 mm* Ring size: 3" I.D. Cheek: 7 ½"


Sizes 5 1/2" , 6" , 7"
AHE-2440
Combination Hackamore
$97.99



Made in the USA


Sweet iron mouth
Stainless steel sides Heavy duty nylon rope
Sizes: 6 1/4"
KNS-269 Hanging Cheek Snaffle Bit
$32.95
Size: 6" and 6 1/2"
SD-110 Rubber Full Cheek Snaffle
$18.95
Rubber Coated Full Cheek Snaffle Size: 5 1/2" Only
KS-160 Dressage Weymouth Low Port
$42.95
Dressage Weymouth Low Port
Sizes: 6" and 6 1/2" and 7"
KNS-202
HANGING CHEEK WATERFORD BIT
$39.95

The Hanging Cheek part is 4 1/4" high and 2 1/4" wide. The small ring has a slightly bigger than 3/4" opening. 3/4" balls in center of links.

Sizes: 6", 6 1/4", 6 1/2
AHE-619
Loose Ring 3 Piece Snaffle Bit with Rollers
$94.99


MADE IN THE USA!!!


This loose ring 3 piece snaffle bit has a mouth made of sweet iron with copper rings on the dog bone center.
3" diameter stainless steel loose rings
Size: 6"
AHE-628
Loose Ring Sweet Iron Snaffle with Twisted Dog Bone
$85.99


MADE IN THE USA!!!


Three piece sweet iron snaffle with a center twisted dog bone mouthpiece.
3" diameter stainless steel loose rings
Size: 6"
SW-7758
Hunter Dee-Ring Snaffle
$42.95











The surgical quality bits are made of the world's finest 18-8 (chromium/nickel) stainless steel. This alloy is best for bits because it extremely strong and resists salt and acids in saliva, and will never rust or spot.

Sizes: 5 1/2", 6", 6 1/2" and 7"
SD-116
D-Ring Rubber Snaffle
$19.95

We have one left in 5 1/2"
SW- c3259

Full Cheek Snaffle with French Link
$54.00



Size
KS-D-RIng Jointed Snaffle
$34.95

D-Ring Jointed Snaffle Bit
Size: 7"

Size:
DH-107
UXETER KIMBERWICK LOW PORT
$35.95


Stainless Steel, comes with Curb Chain and hooks. Offers good stopping control. A nice bit for a tad harder to stop draft. It also offers good lateral control of horse. The low port mouth sits comfortably over the tongue with an even pressure applied to the jaw over the bars. This helps to keep the tongue under the bit.

Sizes: 5 1/2"
AHE-107
UXETER KIMBERWICK LOW PORT
$71.99




MADE IN THE USA!

This stainless steel bit comes with a curb chain and hooks.

Sizes
SW-3826

Uxeter Kimberwick Low Port
$49.95


Sizes: 5 3/4", 6"

Sizes:
AHE-RRBGrazibgBit AHE-114

GRAZING BITwith STAINLESS STEEL MEDIUM PORT
$56.99



MADE IN THE USA!

This stainless steel Grazing bit allows the horse to swallow, also graze hence the name. Great leverage for stopping, this bit is super for the well behaved & schooled horse. Designed to be used with a horse that neck reins. Direct reining is not used with this bit as it does not allow for lateral control. It has 6 1/2" sides with 1" rings.
Stainless Mouth

Sizes: 6", 6 1/2", 7"

Sizes:
AHE-109
BUTTERFLY COPPER FRENCH LINK
$79.95

MADE IN THE USA!


Size